KCB series low pressure gear oil pump

KCB series low pressure gear oil pump is applies to delivering non-corrosive lubricating oil or equivalent liquid without solid paraticles and fibres at temperature below 200 C, and with the viscosity of 5-1500 cSt.

Reducing the speed, the pump can delivery the liquid that the viscosity can be up to 50000 cSt.

Feature

KCB series low pressure gear oil pump is mainly composed of gears, axles, pump body, pump cover, safety valve and axle-end seals etc. The heattreated gears have the advantage of higher hardness and intensity, and rotate with the axles inside the replaceable bearing sleeves. All of pump's parts can be lubricated by delivered medium when working.

KCB series low pressure gear oil pump is properly designed with leakage and return chute, which lets the gears bear the least torque force and reduces load and wear on bearings in order to raise pump' efficiency.

KCB series low pressure gear oil pump is also designed with safty valve for protection against overload. The full return flow pressure of the safety valve is 1.5 times higher than the rated exhaust pressure of the pump. It can be also adjusted within the allowance of exhaust pressure range according to circumstances. But please note the safty valve can't be applied as pressure reducing valve for long time. You may install pressure reducing valve separately on pipe-line if needed.

The direction of rotation is clockwise viewed from coupling end.

Application cope

1. Medicine industry;

2. Fine chemical industry;

3. Food industry;

4. Cosmetics industry;

5. Printing and dyeing industry;

6. Brewing industry;

Parameter Date

KCB18.3-8.3.3 cast iron Gear Pump

KCB135-483.3 stainless steel gear pump